SPECIAL BATTERIES LTD
Sales Line: +44 (0)116 2413796
3.6V 4AH Industrial High Temp C Nimh battery with 4.7mm spade terminals each end
|
Industrial & Trade customers only, if you require a quantity of 10+ pcs of single or mixed items then please request a quote:
|
|
Get Quote
|
Our Batteries and battery packs are NOT to be used in any lighting fitting used in inflammable or hazardous areas.
Hazardous areas are explosive atmospheres created by gases, vapours and ignitable dusts or fibers.
These can be present in installations such as processing refineries, chemical production facilities, oil/gas platforms, flammable liquids storage facilities, fuel transportation, petrol stations, paint production, paper production etc.
It is the customers responsibility to check on the environment that the battery / battery-pack is to be used in.
| ESP-2-09-202X |
|
NIMH
MSDS datasheet
|
|
8507500090
|
| 3.6V |
| 4000mAh |
| 146 x 26 mm |
| 244g |
| ESP4000CHHT |
|
|
EM00154 |
|
NiMH 3.6V 4000MAH |
|
NI-MH C 4000mAh 3.6V |
| YUASA |
3CH2-5T4 |
|
3.6V 4Ah ( old capacity was 2.5Ah )
Industrial Nickel Hydride High Temperature
battery with 4.7mm small spade contacts each end.
Please check dimensions against the old battery as ours maybe slightly different.
Note our replecement is the same electrical specification as the original but the size is very slightly different. Please check this before ordering.
The original cell width was 23mm
These cells are not avilable now.
Our cell width is 26.5
( 28mm including end cap height )
so please check that this will still fit ok into your equipment.
|